Picatinny-Style Rail Dash Mount Phone Holder for 2018-2023 Jeep Wrangler & 2020-2023 Jeep Gladiator
Picatinny-Style Rail Dash Mount Phone Holder for 2018-2023 Jeep Wrangler & 2020-2023 Jeep Gladiator
If you're looking to securely mount multiple devices in your Jeep with the convenience of being able to quickly add and remove them, our All-Aluminum Picatinny-Style Rail Mount may be exactly what you're looking for.
SPEED & STRENGTH
The main benefit of our Picatinny-Style rail mount is the speed and convenience of mounting your devices.
Our Picatinny-compatible accessories can be installed to the rail mount with a single hex nut and only takes a few seconds.
That means you can go from being trail-ready with a tablet, action camera and handheld radio to daily driver with just a phone holder in a matter of minutes.
The all-aluminum construction of this mount boasts incredible strength while being lightweight so whether you need to mount 1 or multiple devices, it can handle it.
BUILT FOR YOUR JEEP
This full-width rail mount is designed specifically for your 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator for an OEM-like fit. Does not fit 2021-2023 Wrangler 4xe.
Whatever rugged terrain your seven slot machine takes you, our Picatinny-style rail mount will keep your devices secured and always within reach.
FULL-WIDTH RAIL MOUNT
A full-width rail mount means you have maximum choice and total control of the placement along the 12-5/8" long Picatinny-style rail.
There are 30 possible attachment positions for your ball mount so you can truly customize your command center by placing your devices exactly where you want them.
FAST & EASY INSTALLATION
Our Picatinny-style rail mount installs using 2 original threaded holes already found in your dash in addition to adhesive tape at both ends of the mount. No drilling or modifications required.
Simply remove the rubber dash mat, remove the 2 screws in the dash, peel off the adhesive covering, set the Picatinny-style rail mount in place and thread the screws back into position to secure the mount. That's it!
From there, secure the Picatinny-compatible ball mount, mounting arm and device holder.
Optional: self-tapping screws are included to further secure the dash mount to the vehicle.
EXPANDABLE & MODULAR
Start with 1 device and expand as your needs change. Our Picatinny-style rail mount gives you the freedom and flexibility to add and move devices.
Going off road? Secure your phone, tablet, camera and radio.
Towing? Secure your phone, TPMS monitor and backup camera display.
Whatever the situation, our Picatinny-style rail mount is up to the task.
IMPORTANT NOTES
- This Picatinny-style rail mount is installed as a standalone dash mount. It cannot be combined with any of our other JL/Gladiator products such as our RubiGrid® mount, single ball or dual ball dash mounts.
- The recommended arm length for a device holder is 7cm.
- When adding an additional device, you will need a Picatinny-compatible 20mm ball mount, 7cm mounting arm and device holder.
- This mount is NOT compatible with 3rd party Picatinny mounts or accessories.
Original: $49.99
-70%$49.99
$15.00More Images
Picatinny-Style Rail Dash Mount Phone Holder for 2018-2023 Jeep Wrangler & 2020-2023 Jeep Gladiator
If you're looking to securely mount multiple devices in your Jeep with the convenience of being able to quickly add and remove them, our All-Aluminum Picatinny-Style Rail Mount may be exactly what you're looking for.
SPEED & STRENGTH
The main benefit of our Picatinny-Style rail mount is the speed and convenience of mounting your devices.
Our Picatinny-compatible accessories can be installed to the rail mount with a single hex nut and only takes a few seconds.
That means you can go from being trail-ready with a tablet, action camera and handheld radio to daily driver with just a phone holder in a matter of minutes.
The all-aluminum construction of this mount boasts incredible strength while being lightweight so whether you need to mount 1 or multiple devices, it can handle it.
BUILT FOR YOUR JEEP
This full-width rail mount is designed specifically for your 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator for an OEM-like fit. Does not fit 2021-2023 Wrangler 4xe.
Whatever rugged terrain your seven slot machine takes you, our Picatinny-style rail mount will keep your devices secured and always within reach.
FULL-WIDTH RAIL MOUNT
A full-width rail mount means you have maximum choice and total control of the placement along the 12-5/8" long Picatinny-style rail.
There are 30 possible attachment positions for your ball mount so you can truly customize your command center by placing your devices exactly where you want them.
FAST & EASY INSTALLATION
Our Picatinny-style rail mount installs using 2 original threaded holes already found in your dash in addition to adhesive tape at both ends of the mount. No drilling or modifications required.
Simply remove the rubber dash mat, remove the 2 screws in the dash, peel off the adhesive covering, set the Picatinny-style rail mount in place and thread the screws back into position to secure the mount. That's it!
From there, secure the Picatinny-compatible ball mount, mounting arm and device holder.
Optional: self-tapping screws are included to further secure the dash mount to the vehicle.
EXPANDABLE & MODULAR
Start with 1 device and expand as your needs change. Our Picatinny-style rail mount gives you the freedom and flexibility to add and move devices.
Going off road? Secure your phone, tablet, camera and radio.
Towing? Secure your phone, TPMS monitor and backup camera display.
Whatever the situation, our Picatinny-style rail mount is up to the task.
IMPORTANT NOTES
- This Picatinny-style rail mount is installed as a standalone dash mount. It cannot be combined with any of our other JL/Gladiator products such as our RubiGrid® mount, single ball or dual ball dash mounts.
- The recommended arm length for a device holder is 7cm.
- When adding an additional device, you will need a Picatinny-compatible 20mm ball mount, 7cm mounting arm and device holder.
- This mount is NOT compatible with 3rd party Picatinny mounts or accessories.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
If you're looking to securely mount multiple devices in your Jeep with the convenience of being able to quickly add and remove them, our All-Aluminum Picatinny-Style Rail Mount may be exactly what you're looking for.
SPEED & STRENGTH
The main benefit of our Picatinny-Style rail mount is the speed and convenience of mounting your devices.
Our Picatinny-compatible accessories can be installed to the rail mount with a single hex nut and only takes a few seconds.
That means you can go from being trail-ready with a tablet, action camera and handheld radio to daily driver with just a phone holder in a matter of minutes.
The all-aluminum construction of this mount boasts incredible strength while being lightweight so whether you need to mount 1 or multiple devices, it can handle it.
BUILT FOR YOUR JEEP
This full-width rail mount is designed specifically for your 2018-2023 Jeep Wrangler JL and 2020-2023 Jeep Gladiator for an OEM-like fit. Does not fit 2021-2023 Wrangler 4xe.
Whatever rugged terrain your seven slot machine takes you, our Picatinny-style rail mount will keep your devices secured and always within reach.
FULL-WIDTH RAIL MOUNT
A full-width rail mount means you have maximum choice and total control of the placement along the 12-5/8" long Picatinny-style rail.
There are 30 possible attachment positions for your ball mount so you can truly customize your command center by placing your devices exactly where you want them.
FAST & EASY INSTALLATION
Our Picatinny-style rail mount installs using 2 original threaded holes already found in your dash in addition to adhesive tape at both ends of the mount. No drilling or modifications required.
Simply remove the rubber dash mat, remove the 2 screws in the dash, peel off the adhesive covering, set the Picatinny-style rail mount in place and thread the screws back into position to secure the mount. That's it!
From there, secure the Picatinny-compatible ball mount, mounting arm and device holder.
Optional: self-tapping screws are included to further secure the dash mount to the vehicle.
EXPANDABLE & MODULAR
Start with 1 device and expand as your needs change. Our Picatinny-style rail mount gives you the freedom and flexibility to add and move devices.
Going off road? Secure your phone, tablet, camera and radio.
Towing? Secure your phone, TPMS monitor and backup camera display.
Whatever the situation, our Picatinny-style rail mount is up to the task.
IMPORTANT NOTES
- This Picatinny-style rail mount is installed as a standalone dash mount. It cannot be combined with any of our other JL/Gladiator products such as our RubiGrid® mount, single ball or dual ball dash mounts.
- The recommended arm length for a device holder is 7cm.
- When adding an additional device, you will need a Picatinny-compatible 20mm ball mount, 7cm mounting arm and device holder.
- This mount is NOT compatible with 3rd party Picatinny mounts or accessories.
